 DR. FORM  HELP                   MENU PAGE                         Page   of   
                                                                                
þ Mouse users can just "Click" on any function.  Keyboard users can use the TAB 
  or Arrow keys, or press the ALT key and the highlighted letter of the         
  function.                                                                     
                                                                                
þ File Extensions indicate type of Form:                                        
    .FMS  - A Form that already has been made and may or may not be filled in.  
    .FM_  - A Master Form                                                       
    .FM@  - A Form that has been saved by Dr. Form  in an Ascii format.         
            These forms do not have any formatting (such as bold, italics,      
            etc.)                                                               
                                                                                
þ Fill In a Form   - Open any Form in FILL IN Mode.  Once a form has been made  
                     in MASTER Mode, it may be filled in in this mode.  All     
                     characters of the Master Form are Protected and cannot be  
                     written over except the Underline Character.               
                                                                                
þ New Master Form  - Start a New Master Form.                                   
                                                                                
þ Edit Master Form - Edits a Master Form.  If a .FMS or .FM@ form is opened and 
                     saved in this mode it will become a Master Form with the   
                     .FM_ extension (the old files will still exist).  All      
                     characters of the .FM@ (or an Ascii File) will become      
                     protected.  However, when a .FMS form is loaded in this    
                     mode, the unprotected characters (if any) will remain      
                     unprotected.  It is not recommended to load .FMS forms in  
                     Master Mode. (see the manual)                              
                                                                                
þ Delete a Form    - Deletes a Form or File.                                    
                     .COM and .EXE Files cannot be deleted.                     
                                                                                
þ Exit             - Exits to DOS     Pressing ALT X will also exit to DOS      
                                                                                
þ To the right of the Master Menu is the File List.  This lists the Forms in    
  alphabetical order.  To scan the files use the Page Up, Page Down, Arrow Keys,
  or with the mouse, use the scroll bar on the right.  Also, if you know the    
  first letter of the file you are looking for just press that letter on the    
  keyboard.                                                                     
                                                                                
þ ALT H -  Is always available for Help.                                        
           Help is context sensitive.  That is, it will be given for whatever   
           area of the program that you are in.                                 
                                                                                
þ ALT R -  Will allow you to change the path and drive so that you can load and 
    &      save files from different paths and drives.  Left Clicking the down  
  ALT A    arrow in the Drive Box will drop it down to show what valid drives   
           your computer has.                                                   
           NOTE:  When using the mouse only a Single Click is needed on the     
                  Drive Box, but a Double Click is needed on the Path Box.      
                                                                                
þ ALT F -  Toggles back and forth between Dr. Form  Files and All Files.  When  
           All Files are shown you can load any Ascii file as long as it doesn't
           contain lines longer that 136 characters maximum.  An Ascii file will
           be truncated after the 63rd line if it is longer.                    
                                                                                
þ ALT P -  Use to select the Printer you are using.  If you can't find yours,   
           experiment to find the one closest to it.  Selecting PLAIN PRINTER   
           will work on almost any printer but will only print the Ascii        
           characters and will not support Bold, Italics, etc.                  
                                                                                
þ ALT U -  Will return to the default drive and path that Dr. Form  was run     
           from.                                                                
                                                                                
þ ESC   -  Will cancel any activity that you are doing.                         
           NOTE:  When working on a Form, Right Clicking the mouse is the same  
                  as the ESC key.  However, when a WINDOW is open, the right    
                  mouse button has no effect.  The window must be closed first. 
                                                                                
                                                                                
þ When saving a MASTER FORM a .BAK file will be made if the form already exists.
                                                                                
þ When saving a form in FILL IN mode or saving as an Ascii file a .BAK file     
  will not be made.                                                             
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                WORKING ON A FORM                    Page   of   
                                                                                
þ Right clicking the mouse is the same as pressing the ESC key.                 
  Left clicking the mouse will re-locate the cursor.                            
                                                                                
þ The 1st row contains the major special functions.  Just Left Click on them,   
  or press ALT and the Highlighted letter.                                      
                                                                                
þ The 24th row is for mouse users.  On the far left and far right are the       
  characters used for scrolling.  The arrows will scroll 1 row, or 1 column,    
  while the others will scroll a full page.  When END is visible, it is the     
  same as pressing the END key.  When "UnDo" is visible, it will UNDO the       
  last major thing that you did.  (Keyboard users:  ALT O  will activate "UnDo".
  ALT H  will activate HELP.                                                    
                                                                                
þ Clicking on "IBM Character Set" will open the window below it.  Clicking on   
  "+" or "-" will scroll through them.  Pressing any of the Function Keys       
  (F1 - F10) will print that character at the screen cursor location.           
                                                                                
þ "MouseSc" turns MouseScroll on and off.  When MouseScroll is on, scrolling is 
  accomplished by simply pushing the mouse cursor against the edges of the      
  screen.  When a Major Function is in use, MouseScroll is "Locked" on.         
  To invoke a Major Function on the 1st row when MouseScroll is turned on, first
  Right Click the mouse once.  This will "temporairly" turn off MouseScroll to  
  give you access to the 1st row.                                               
                                                                                
ALT V  or  CTRL F1 -  MOVE (N/A in FILL IN)            ALT B -  Bold            
ALT Y  or  CTRL F2 -  COPY (N/A in FILL IN)            ALT C -  Condensed       
ALT E  or  CTRL F3 -  ERASE (N/A in FILL IN)           ALT I -  Italics         
ALT G  or  CTRL F4 -  DRAW GRID (N/A in FILL IN)       ALT P -  Subscript       
ALT L  or  CTRL F5 -  DRAW LINES (N/A in FILL IN)      ALT S -  Superscript     
ALT A  or  CTRL F6 -  DUPLICATE (N/A in FILL IN)       ALT U -  Underlined      
ALT F  or  CTRL F7 -  FILL (N/A in FILL IN)            ALT T -  Double Height   
ALT M  or  CTRL F8 -  SET COLUMNS (N/A in FILL IN)     ALT W -  Double Width    
CTRL SHIFT F9  - INSERT COLUMN (N/A in FILL IN)   ALT D or X -  D-Width D-Height
CTRL SHIFT F10 - DELETE COLUMN (N/A in FILL IN)                                 
                                                       Many of these may        
      Moves cursor                                 be combined.  Select     
SHIFT    Moves screen up one row                      OTHER for details.       
SHIFT    Moves screen down one row                                             
SHIFT    Moves screen right one column (if more than 80 columns)               
SHIFT    Moves screen left one column (if more than 80 columns)                
CTRL     Moves screen to far right (if more than 80 columns)                   
CTRL     Moves screen to far left (if more than 80 columns)                    
PAGE UP          Moves screen up 20 lines                                       
PAGE DOWN        Moves screen down 20 lines                                     
SHIFT PAGE UP    Moves screen to Home position and cursor to upper left corner  
SHIFT PAGE DOWN  Moves screen and cursor to last line in use                    
                                                                                
ESC (Right Click)  Exit current activity and show options                       
TAB           Moves cursor right 8 spaces (In FILL IN Mode moves cursor to the  
                         next Tab position)                                     
SHIFT TAB     Back Tab                                                          
ENTER         Moves cursor to first position on next line (In FILL IN Mode moves
                         cursor to the first Tab position below the current Row)
HOME          Moves cursor to first position on line  (In FILL IN Mode moves    
                         cursor to the first Tab position on the form.          
END           Moves cursor to last character on line                            
SHIFT HOME    Moves cursor to upper left corner                                 
SHIFT END     Moves cursor to lower left corner                                 
SHIFT ENTER   Places character that the cursor is under in the Duplicate Buffer 
              A click will be heard to confirm this                             
INSERT        Inserts text                                                      
DELETE        Deletes text                                                      
SHIFT INSERT  Inserts a new blank row  (N/A in FILL IN Mode)                    
SHIFT DELETE  Deletes current row  (N/A in FILL IN Mode)                        
                                                                                
ALT J   Toggles the cursor location between Row & Column and Inches             
ALT K   Selects whether the Screen or Mouse cursor is displayed                 
                                                                                
CTRL C   Center Text  (Centers according to column width, or centers text       
         within boxes. See manual for details)  N/A in FILL IN Mode             
CTRL E   Erases from cursor to end of line  (In FILL IN Mode only erases        
                                             non-protected characters)          
CTRL A   Erases from cursor to end of form   (In FILL IN Mode only erases       
                                              non-protected characters)         
CTRL F   Disables Form Feed  (see manual: Making Labels)                        
CTRL M   Toggles between color & monochrome  (N/A in MASTER Mode)               
CTRL T   Prints current time     CTRL SHIFT T   Prints 'Time Stamp' (see manual)
CTRL D   Prints current date     CTRL SHIFT D   Prints 'Date Stamp' (see manual)
                                                                                
þ Keyboard Users:                                                               
  ALT 0 (on the keyboard) - Opens the window for the IBM extended character set.
  ALT +  and  ALT -  (on the keyboard) - Steps through the IBM extended         
                     character set.  Characters in gray are not supported by the
                     currently selected Printer.                                
  F1 to F10 -  Print the corresponding IBM character in the current window.     
                                                                                
þ Double Width characters will always be followed by a Dot.  This is for        
  Printing purposes and also to maintain continuity on the screen.              
                                                                                
þ When using Double Height characters you must leave the space above them blank.
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                   SELECT PRINTER                    Page   of   
                                                                                
þ Use the cursor keys or Left Click on one of the printer selections in the left
  box.  When using the mouse, a single click will show what print styles are    
  supported by that particular printer.  If your printer doesn't appear on the  
  list, then experiment to find the one that will work best.  Most printers     
  today are compatable with one of the Epson or IBM selections.  For the        
  LaserJet printers, refer to the manual for detailed information.              
                                                                                
þ Selecting PLAIN PRINTER will work on almost any printer, but will not support 
  formating (Bold, Italics, etc.)                                               
                                                                                
þ After you select a printer, either press the ENTER key, double click on it    
  with the mouse or click on OK.                                                
                                                                                
þ The program does not inhibit print styles when you are making a form.  So make
  sure that if you are using styles such as  'Double Height'  that your printer 
  will support them.                                                            
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                   OPTIONS LINE                      Page   of   
                                                                                
þ Either Left Click on your choice, or press the letter that is highlighted.    
                                                                                
þ  S  - Save                                                                    
                                                                                
þ  Q  - Quit and go back to the Menu.  If you have made changes you will be     
        asked if you want to Save them.                                         
                                                                                
þ  P  - Print Form on your Printer.                                             
                                                                                
þ  T  - Set or Remove Tab Stops in your Form.                                   
                                                                                
þ ESC - Resume making or filling in your Form.                                  
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                   SAVE FORM                         Page   of   
                                                                                
þ The Form Name can be any name accepted by DOS.  The extension is added        
  automatically (Do NOT enter an extension).                                    
                                                                                
þ Extensions:                                                                   
             .FMS   A form already made and may or may not be already filled in.
             .FM_   A Master Form                                               
             .FM@   A form saved in Ascii format by Dr. Form                    
                                                                                
                                                                                
þ FORMATTED -  Selecting "No" will save the form in an Ascii format so that it  
               can be read by other programs.  It will create a new file with   
               the  .FM@  extension.  All formatting will be lost.  But don't   
               worry, the  .FMS  or  FM_  file will still be there unless this  
               is a New Form in which case you should save it again by selecting
               "Yes" in this field.                                             
                                                                                
þ DRIVE & PATH -  The same as in the Master Menu.  You can change them by       
                using the TAB key to get there, pressing ALT and the highlighted
                letter, or using the mouse.  Clicking on the arrow on the right 
                of the Drive Box will drop the box down to show all available   
                drives on your computer.                                        
                NOTE:  When using the mouse only a Single Click is needed on the
                       Drive Box, but a Double Click is needed on the Path Box. 
                                                                                
                                                                                
þ DEFAULT PATH -  Will return to the default drive and path that Dr. Form  was  
                was run from.                                                   
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                   SAVE CHANGES                      Page   of   
                                                                                
þ You have made at least one change to the Form since it was loaded.            
                                                                                
þ Enter  Y  to save it.                                                         
                                                                                
þ Enter  N  to leave the Form as it was before you loaded it.                   
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                   TAB STOPS                         Page   of   
                                                                                
þ All existing Tab Stops will be highlighted.                                   
                                                                                
þ TABS can only be set on blank spaces, or on an  Underline Character.          
                                                                                
þ To set a TAB press any letter key and the TAB will be set.                    
  To remove a TAB place the cursor under the TAB and press any letter key.      
                                                                                
þ With the mouse, just Left Click on the spot where you want to set or remove   
  a TAB.                                                                        
                                                                                
þ CTRL-Z  Removes all TABS.                                                     
                                                                                
þ Press  ESC  when finished.  Tab Stops are saved with the Form.                
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                   PRINT FORM                        Page   of   
                                                                                
þ Use the Number keys to select the number of copies. (Just like a copying      
  machine)                                                                      
  Pressing the letter "C" will clear the counter back to 1.                     
                                                                                
þ The default values for printing are 10 Characters per inch, Bi-directional,   
  and either Utility, or Roman (Letter Quality if your printer supports it).    
                                                                                
þ Note that areas that are not supported by your printer will be "grayed out".  
                                                                                
þ If you want to select CHARACTERS/INCH  or  PRINT STYLE directly from your     
  printer, then select the "Manual" option.                                     
                                                                                
þ To make a selection with the keyboard, use the Tab key to select the          
  appropriate box, and then use the arrow keys to make your selection.          
  Mouse users can just Left Click on their choice.                              
                                                                                
þ The printer currently in use will be displayed at the top of the window.      
  Select CHANGE PRINTER to select another one.  When you select a new printer   
  the options will return to their default values.                              
                                                                                
þ ESC  Cancels printing.                                                        
                                                                                
                                                                                
Printer width   80 Columns      110 Columns      132 Columns      136 Columns   
                                                                                
     10 CPI     80 Characters   110 Characters   132 Characters   136 Characters
     12 CPI     96 Characters   132 Characters   136 Characters   136 Characters
     15 CPI     120 Characters  136 Characters   136 Characters   136 Characters
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                MOVE A BLOCK OF TEXT                 Page   of   
                                                                                
þ Position the cursor at the top left corner of the area that you want to MOVE. 
  This must be done "before" you invoke MOVE.  Now either Left Click MOVE,      
  press ALT V or CTRL F1.                                                       
                                                                                
þ Now "highlight" the area to be moved.                                         
  With the mouse Left Click the bottom right of the area to be "Moved" (DON'T   
  drag the mouse).  Notice that MouseScroll is "locked" on.  If the area that   
  you want to "Move" is beyond the physical boundaries of the screen, just push 
  the mouse against the edges of the screen.                                    
  NOTE: You can not highlight an area that is above, or to the left of your     
        starting point.  When you position the mouse in this area the mouse     
        cursor will turn red with a black "X" in it.                            
                                                                                
  With the keyboard, use the cursor keys for highlighting.                      
                                                                                
þ Now Left Click on END or press the END key.  If you have hightlighted an area 
  that went past the boundaries of the screen, the screen will relocate to your 
  starting point and a white "rectangle" will appear outlining the area to be   
  "Moved".                                                                      
                                                                                
þ Use the cursor keys, or just move the mouse until the rectangle is in the new 
  position that you want it.                                                    
                                                                                
þ Left Click the mouse, or press the INSERT key.  The old area will be erased   
  and the block of text will be moved to the new area.                          
                                                                                
þ If you don't like the new position, just move the mouse again, or use the     
  cursor keys.  The rectangle will reappear again.  Reposition it and repeat    
  the previous step.                                                            
                                                                                
þ If you make a mistake, or just don't like what you have done, you can UNDO    
  it.  As long as "UnDo" is visible on the 24th line you can press ALT O, or    
  Left Click on it and it will UNDO the last thing you did.                     
                                                                                
þ Right Click the mouse, or press the ESC key when you are finished.            
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                COPY A BLOCK OF TEXT                 Page   of   
                                                                                
þ Position the cursor at the top left corner of the area that you want to COPY. 
  This must be done "before" you invoke COPY.  Now either Left Click COPY,      
  press ALT Y or CTRL F2.                                                       
                                                                                
þ Now "highlight" the area to be copied.                                        
  With the mouse Left Click the bottom right of the area to be "Copied" (DON'T  
  drag the mouse).  Notice that MouseScroll is "locked" on.  If the area that   
  you want to "Copy" is beyond the physical boundaries of the screen, just push 
  the mouse against the edges of the screen.                                    
  NOTE: You can not highlight an area that is above, or to the left of your     
        starting point.  When you position the mouse in this area the mouse     
        cursor will turn red with a black "X" in it.                            
                                                                                
  With the keyboard, use the cursor keys for highlighting.                      
                                                                                
þ Now Left Click on END or press the END key.  If you have hightlighted an area 
  that went past the boundaries of the screen, the screen will relocate to your 
  starting point and a white "rectangle" will appear outlining the area to be   
  "Copied".                                                                     
                                                                                
þ Use the cursor keys, or just move the mouse until the rectangle is in the new 
  position that you want it.                                                    
                                                                                
þ Left Click the mouse or press the INSERT key.  The block of text will be      
  copied to the new area.  The old area "will not be erased", but parts of it   
  could be copied over.                                                         
                                                                                
þ If you don't like the new position, just move the mouse again, or use the     
  cursor keys.  The rectangle will reappear again.  Reposition it and repeat    
  the previous step.                                                            
  You can copy the block of text as many times as you want in as many places as 
  you want.  You can use this to create interesting patterns.                   
                                                                                
þ If you make a mistake, or just don't like what you have done, you can UNDO    
  it.  As long as "UnDo" is visible on the 24th line you can press ALT O, or    
  Left Click on it and it will UNDO the last thing you did.                     
                                                                                
þ Right Click the mouse, or press the ESC key when you are finished.            
                                                                                
                                                                                
 DR. FORM  HELP                ERASE A BLOCK OF TEXT                 Page   of  
                                                                                
þ Position the cursor at the top left corner of the area that you want to ERASE.
  This must be done "before" you invoke ERASE.  Now either Left Click ERASE,    
  press ALT E or CTRL F3.                                                       
                                                                                
þ Now "highlight" the area to be erased.                                        
  With the mouse Left Click the bottom right of the area to be "Erased" (DON'T  
  drag the mouse).  Notice that MouseScroll is "locked" on.  If the area that   
  you want to "Erase" is beyond the physical boundaries of the screen, just push
  the mouse against the edges of the screen.                                    
  NOTE: You can not highlight an area that is above, or to the left of your     
        starting point.  When you position the mouse in this area the mouse     
        cursor will turn red with a black "X" in it.                            
  With the keyboard, use the cursor keys for highlighting.                      
                                                                                
þ Now Left Click on END or press the END key.  The area that was highlighted    
  will now be erased.                                                           
                                                                                
þ If you make a mistake, or just don't like what you have done, you can UNDO    
  it.  As long as "UnDo" is visible on the 24th line you can press ALT O, or    
  Left Click on it and it will UNDO the last thing you did.                     
                                                                                
 DR. FORM  HELP                   DRAW GRID                         Page   of   
                                                                                
þ Position the cursor at the top left corner of the GRID location               
  This must be done "before" you invoke GRID.  Now either Left Click GRID,      
  press ALT G or CTRL F4.                                                       
                                                                                
þ A bright white asterisk will appear at the top left position of the GRID.     
                                                                                
þ Use the Mouse or the Cursor, Tab, and Enter Keys to position the cursor to the
  positions along the top and left sides of the GRID area where you want lines  
  to be drawn.                                                                  
                                                                                
þ Press  S  for Single Lines                                                    
  Press  D  for Double Lines                                                    
                                                                                
þ Press any other letter key to place an asterisk at the position.  The size    
  and layout of the GRID will be determined by where you place the Asterisks.   
                                                                                
þ With the Mouse Left Click on each position to place an asterisk.  If the GRID 
  will extend beyond the physical boundaries of the screen just push the mouse  
  cursor against the edges of the screen.                                       
  NOTE:  An asterisk can only be placed below and to the right of the starting  
         point, and it must be exactly vertical or horizontal to it.  If you    
         move the mouse cursor outside of these limits it will turn red with    
         a black "X" in it.  Left Clicking when the mouse cursor is red will    
         have no effect.                                                        
                                                                                
þ Left Click on END or press the END key when finished.                         
                                                                                
þ Right Click or press the ESC key to cancel.                                   
                                                                                
þ If you make a mistake, or just don't like what you have done, you can UNDO    
  it.  As long as "UnDo" is visible on the 24th line you can press ALT O, or    
  Left Click on it and it will UNDO the last thing you did.                     
                                                                                
þ HINT:  If you are making a GRID that will have Column Headings you may want   
         to lay out and position the Column Headings first and then draw the    
         GRID "around" them.                                                    
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                   DRAW LINES                        Page   of   
                                                                                
þ Press  S  for Single Lines                                                    
  Press  D  for Double Lines                                                    
                                                                                
þ With the keyboard use the cursor keys to draw lines.                          
                                                                                
þ Mouse users:                                                                  
    DON'T drag the mouse.                                                       
    Lines are drawn by Left Clicking the mouse.  They are drawn FROM the        
    starting point (which is the "screen cursor") TO the "mouse cursor".  A line
    must be exactly vertical or horizontal with the starting point.  If you go  
    outside these boundaries, the mouse cursor will turn red with a black "X" in
    it.  Left Clicking when the mouse cursor is red will make that position a   
    "new" starting point.                                                       
    You can draw lines beyond the physical boundaries of the screen by pushing  
    the mouse cursor against the edges of the screen.                           
                                                                                
þ All users:                                                                    
    SHIFT + (one of the cursor keys) will draw a line in that direction         
        from the cursor up to the first position that is not a "Space".         
                                                                                
    Press  E  to Erase.  The cursor keys will now Erase anything in their path. 
    Press  P  to Pause.  You may now move the cursor to a new location.         
    Press  R  to Resume drawing lines.                                          
                                                                                
þ "UnDo" will UNDO the last line that was drawn.  Either Left Click on "UnDo"   
   or press ALT O.                                                              
                                                                                
þ Right Click the mouse or press the ESC key when finished.                     
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                 DUPLICATE CHARACTER                 Page   of   
                                                                                
þ This function is similiar to Draw Lines, except that instead of using the line
  drawing characters it will DUPLICATE the Character in the Duplicate Buffer.   
  This character is shown on the 25th line.  To put a character in the Duplicate
  Buffer, press Pause and put the cursor under the desired character.  Now press
  SHIFT ENTER (a click will be heard to confirm this).  When not in DUPLICATE   
  Mode, pressing  SHIFT ENTER  at anytime will do this.  You can DUPLICATE all  
  of the IBM Extended Character Set.                                            
                                                                                
þ With the keyboard use the cursor keys to Duplicate.                           
                                                                                
þ Mouse users:                                                                  
    DON'T drag the mouse.                                                       
    Characters are duplicated by Left Clicking the mouse.  They are duplicated  
    FROM the starting point (which is the "screen cursor") TO the "mouse        
    cursor".  The mouse cursor must be exactly vertical or horizontal with the  
    starting point.  If you go outside these boundaries, the mouse cursor will  
    turn red with a black "X" in it.  Left Clicking when the mouse cursor is red
    will make that position a "new" starting point.                             
    You can draw lines beyond the physical boundaries of the screen by pushing  
    the mouse cursor against the edges of the screen.                           
                                                                                
þ All users:                                                                    
    SHIFT + (one of the cursor keys)  will DUPLICATE that character in the      
    corresponding direction, from the cursor up to the first position that is   
    not a "Space".                                                              
                                                                                
    Press  E  to Erase.  The cursor keys will now Erase anything in their path. 
    Press  P  to Pause.  You may now move the cursor to a new location.         
    Press  R  to Resume DUPLICATING.                                            
                                                                                
þ "UnDo" will UNDO the last line that was duplicated.  Either Left Click on     
  "UnDo" or press ALT O.                                                        
                                                                                
þ Right Click the mouse or press the ESC key when finished.                     
                                                                                
þ You cannot DUPLICATE Double With or Double Height characters.                 
                                                                                
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                    FILL AREA                        Page   of   
                                                                                
þ This function FILLS all  Empty Spaces  in an area with the character in the   
  Duplicate Buffer.  Anything else is left untouched.                           
  This character is shown on the 25th line.  To change the character in the     
  Duplicate Buffer, exit FILL and put the cursor under the desired character.   
  Now press SHIFT ENTER (a click will be heard to confirm this).  Now, select   
  FILL again.  You can FILL with any character, including those in the IBM      
  Extended Character Set.                                                       
                                                                                
þ Position the cursor at the top left corner of the area that you want to FILL. 
  This must be done "before" you invoke FILL.  Now either Left Click FILL,      
  press ALT F or CTRL F7.                                                       
                                                                                
þ Now "highlight" the area to be filled.                                        
  With the mouse Left Click the bottom right of the area to be "Filled" (DON'T  
  drag the mouse).  Notice that MouseScroll is "locked" on.  If the area that   
  you want to "Fill" is beyond the physical boundaries of the screen, just push 
  the mouse against the edges of the screen.                                    
  NOTE: You can not highlight an area that is above, or to the left of your     
        starting point.  When you position the mouse in this area the mouse     
        cursor will turn red with a black "X" in it.                            
                                                                                
þ Now Left Click on END or press the END key.  All the blank spaces in the area 
  that was highlighted will now be filled in.                                   
                                                                                
þ If you make a mistake, or just don't like what you have done, you can UNDO    
  it.  As long as "UnDo" is visible on the 24th line you can press ALT O, or    
  Left Click on it and it will UNDO the last thing you did.                     
                                                                                
                                                                                
                                                                                
                                                                                
 DR. FORM  HELP                   OTHER OPTIONS                     Page   of   
                                                                                
þ NOTE:  All these functions can also be selected from the keyboard when        
         working on a form.                                                     
                                                                                
þ Keyboard users:                                                               
         Use the TAB key to move to the different boxes, and then use the arrow 
         keys to make your selection.  You can also press ALT plus the          
         highlighted letter.                                                    
                                                                                
þ Mouse users:                                                                  
         Just click on your selection.                                          
                                                                                
þ Bold & Underline are not valid with Superscript, Subscript and Condensed.     
                                                                                
þ CURSOR LOCATION:                                                              
         ALT J  will toggle this when you are working on a form.  Determines    
         whether the cursor location is given in Row & Column or in Inches.     
         When you select Inches it is accurate whether you are using 10, 12     
         or 15 CPI.                                                             
                                                                                
þ WHICH CURSOR:                                                                 
         ALT K  will toggle this when you are working on a form.  Either the    
         Screen Cursor or the Mouse Cursor can be tracked.                      
                                                                                
þ FILL IN MODE ONLY:                                                            
         CTRL M  will toggle this when you are filling in a form.  This is      
         only valid when in FILL IN Mode.  It will be grayed out when you are   
         in MASTER Mode.  When you select "Master Form in Monochrome" the       
         MASTER Form will be in monochrome, but the parts you fill in will still
         be in color.  This can make it easier when filling out a form.         
                                                                                
                                                                                
                                                                                
                                                                                
